Blog · Published November 17, 2026
A load that pays $2,400 feels like a good day. Then the truck payment, insurance, fuel, tires and the empty miles to get there all come out of it, and what is left may be a lot less than you thought. Revenue is not profit, and the only way to know the difference on every load is to know your cost per mile.
This guide shows you how to work out your real cost per mile for trucking, step by step, with a worked example you can copy. By the end you will know the minimum rate you can accept on any load, and you will be able to tell a load that looks good from a load that actually pays.
What cost per mile means
Cost per mile (CPM) is the total amount it costs you to run your truck for a period of time, divided by the total miles you drove in that same period.
Cost per mile = total operating costs ÷ total miles
Two details matter here:
- Total miles means every mile the wheels turned, loaded and empty. Deadhead miles (driving empty to a pickup or repositioning after a delivery) cost you fuel, wear and time just like loaded miles. They just don't earn anything directly.
- It covers a set period, usually a month or a year. A full year smooths out one-off costs like annual permits and a big repair bill, so it gives you a steadier number than a single month.
Once you have the number, every rate becomes easy to judge. If your cost is $1.57 per mile and a broker offers $1.40 per mile all-in, you know before you pick up the phone that the load loses money.
For context, industry surveys have put the average all-in cost of running a truck at well over $2 per mile in recent years, once driver pay is included. Treat that as an approximate benchmark only. Your own number depends on your equipment, your fuel, your lanes and how much you run, so calculate yours rather than borrowing someone else's.
Costs to include
Split your costs into two groups: fixed costs that arrive whether the truck moves or not, and variable costs that rise with every mile.
Fixed costs
These are monthly or yearly bills. Add them up for the year, then divide by your annual miles.
- Truck payment (or lease, or the monthly cost of a truck you own outright that you still need to replace someday).
- Insurance: primary liability, physical damage, cargo and any occupational accident or bobtail coverage you carry.
- Permits, plates and fees: registration, heavy vehicle use tax, UCR, your operating authority costs and any state permits.
- Phone and data: you run your business from it, so it belongs in the number.
- Trailer payment or rental, if it isn't covered by the carrier you lease to.
Variable costs
These move with miles driven.
- Fuel: your largest variable cost. Divide your diesel price per gallon by your real miles per gallon.
- Maintenance and tires reserve: set aside a fixed amount every mile, not just when something breaks. Many owner-operators reserve somewhere between 15 and 20 cents per mile for oil changes, brakes, tires and repairs. A new engine or transmission job is far larger, so if you carry no other repair fund, lean toward the high end.
- Tolls, averaged across your lanes.
- Driver pay: if you hire drivers, include their pay per mile or per load. If you drive the truck yourself, decide what you want to pay yourself. Leaving this out is how owner-operators end up working for free without noticing.
- Other per-mile items such as DEF, scales, parking and lumper fees you pay and don't get reimbursed for.
Don't forget deadhead
You don't add deadhead as a separate cost. You include it by dividing your costs by all miles, loaded and empty. That is why your cost per loaded mile is always higher than your cost per total mile. We will use both numbers in the example below.
Worked example: a one-truck owner-operator
This is an example with made-up round numbers. Replace them with your own.
Assume one truck that runs 100,000 miles in a year: 88,000 loaded miles and 12,000 deadhead miles. Diesel is $6.00 a gallon and the truck averages 6.5 mpg. The owner drives the truck.
Annual fixed costs
| Item | Per year |
|---|---|
| Truck payment ($2,000/month) | $24,000 |
| Insurance ($1,300/month) | $15,600 |
| Permits, plates and fees | $3,000 |
| Phone and data ($100/month) | $1,200 |
| Total fixed | $43,800 |
Fixed cost per mile: $43,800 ÷ 100,000 = $0.44
Variable costs per mile
| Item | Per mile |
|---|---|
| Fuel ($6.00 ÷ 6.5 mpg) | $0.92 |
| Maintenance and tires reserve | $0.18 |
| Tolls (average) | $0.03 |
| Total variable | $1.13 |
Cost per mile: $0.44 + $1.13 = $1.57
That number leaves out one thing: your own pay. If you want to pay yourself a flat $0.50 per mile for driving, your cost per mile becomes $2.07. If you hire a driver, use their per-mile pay in the same way.
Now look at what deadhead does. Total annual cost at $1.57 is about $157,000. Spread over only the 88,000 loaded miles, that is roughly $1.79 per loaded mile. So when you compare yourself to rates quoted per loaded mile, $1.57 is not your break-even. Closer to $1.79 is.
Profit per load
Cost per mile is a yardstick. The real decision happens at the load level:
Profit per load = rate − (cost per mile × (loaded miles + deadhead miles))
Or, per mile:
Profit per mile = rate ÷ (loaded + deadhead miles) − cost per mile
Here are two loads, using the $1.57 cost per mile from above (before paying yourself).
Load A
- Rate: $2,400
- Loaded miles: 800
- Deadhead to pickup: 90
- Total miles: 890
- Cost: 890 × $1.57 = $1,397
- Profit: $2,400 − $1,397 = about $1,003
- Rate per loaded mile: $3.00. Rate per total mile: $2.70.
Load B
- Rate: $1,600
- Loaded miles: 500
- Deadhead to pickup: 150
- Total miles: 650
- Cost: 650 × $1.57 = $1,021
- Profit: $1,600 − $1,021 = about $579
- Rate per loaded mile: $3.20. Rate per total mile: $2.46.
Load B pays more per loaded mile, and it looks like the better load if you only look at the rate per mile on the screen. But after the empty 150 miles it earns about $424 less. Load A wins.
You can also flip the formula to find your floor. The minimum you should accept is:
Break-even rate = cost per mile × (loaded + deadhead miles)
For Load A that is $1,397, or about $1.75 per loaded mile. Anything above that is profit. Anything below it, you are paying to haul the freight.
Common mistakes
- Ignoring deadhead. Quoting yourself on loaded miles only makes every load look better than it is.
- Using last year's fuel price. Diesel moves. Update your fuel cost per mile when prices change, and tie your fuel surcharge to a current weekly average where you can.
- Assuming your advertised mpg. Use the miles per gallon you actually get over a few tanks, with real loads, hills and idle time.
- Skipping the maintenance reserve. Skipping it does not remove the cost. It only moves a $4,000 surprise into a month you can't afford.
- Not paying yourself. If your cost per mile has no wage in it, you don't know whether the business works. It only tells you what is left to live on.
- Forgetting yearly costs. Permits, plates, taxes and insurance down payments are large and easy to miss in a monthly budget.
- Calculating once and never again. A new insurance renewal, a truck payment change or a different lane mix can move your number by 10 cents or more. Recalculate at least every quarter.
Put your numbers to work
You don't need to do all of this on paper. Start with the free calculator at haulsimple.co/trucking-profit-calculator: enter your rate, loaded miles, deadhead miles, fuel price and costs, and see your profit on the load in seconds.
When you want to track it on every load instead of one at a time, start the 30-day free trial at haulsimple.co/register. No card is required. HaulSimple is built for owner-operators and small fleets of 1 to 20 trucks. It tracks profit per load, your brokers, proof of delivery (PODs) and your invoices in one place, so you can see which loads and which brokers actually make you money.
FAQ
What is a good cost per mile for an owner-operator?
There is no single good number. It depends on your truck, insurance, fuel and how many miles you run. What matters is how your cost per mile compares to the rates you accept. If your cost is $1.57 and your average rate per total mile is $2.50, you are making about 93 cents a mile before your own pay. If the two numbers are close, you have little room for a bad week.
Should I include deadhead miles in cost per mile?
Yes. Divide your total costs by all miles driven, loaded and empty. Then, when you price a specific load, add the deadhead miles to that load's total miles. It is the only way to see what a load really earns.
How many miles should I use for my annual estimate?
Use your actual miles from the last 12 months if you have them. If you are new, take a realistic estimate based on the weeks you plan to run. An optimistic mileage figure makes your fixed cost per mile look lower than it is, so be conservative.
How often should I recalculate my cost per mile?
Quarterly is a good habit, and again any time something big changes: diesel prices, your insurance renewal, a new truck payment or a new lane. Fuel is the part that moves fastest, so check that number most often.
This article is for general information. The figures in the worked example are illustrative, not a benchmark. Use your own costs when you price a load.